YAQIN MC 50L font b Integrated b font vacuum tube font b amplifier b font SRPP
Klikk for å se detaljer
YAQIN MC 50L font b Integrated b font vacuum tube font b amplifier b font SRPP
HTB1c9HQHpXXXXaWXVXXq6xXFXXXO
HTB1E6HVHpXXXXctXpXXq6xXFXXX9
HTB1YPj0HpXXXXaGXXXXq6xXFXXXO
HTB1h6zJHpXXXXXjapXXq6xXFXXX8

YAQIN MC-50L Integrated vacuum tube amplifier SRPP circuit KT88(6550) ultra-linear class AB1 Power amplifier 2x50W110V ~ 220V

60 % av kjøperne likte dette produktet!
Availability: in stock
Pris:  5718.00 kr / piece
fra AliExpress
45 days Money back 45 dager Penger tilbake Retur aksepteres hvis produktet ikke er som beskrevet, kjøper betaler retur frakt; eller beholder produktet & blir enig om refusjons beløp med selger.
On-time Delivery Punktlig levering
Garantier: Punktlig Levering 60 dager

Del:

Thank you for visiting WANBO SHOP! welcome to consult all item’s price, especially about the international freight of above 20Kg, maybe there are some discount for you. because the price is not fixed! WANBO SHOP will 100% reply to you!

The main factors affect the sound quality of vacuum tube amplifier

1. Single-ended and class AB1 circuit

At the end of the power amplification, amplification of push-pull is easier to get high power output, because push-pull is a vacuum tube amplifier «+» signal, a vacuum tube amplifier «-» signal, and then superimposed, so large distortion. Single-ended amplifier is a vacuum tube amplifier «+, -» signal, does not need the signal superposition, therefore less distortion. The sound Single-ended than push-pull good, especially in some minor details. However, Single-ended is difficult to obtain high power output, with vacuum tubes of the same type, Single-ended can do 10W, while push-pull is easy to do 30W, Single-ended to obtain large power will have to pay more price.

2. push-pull end power amplifier of vacuum tube different connections

push-pull the end of the power amplifying vacuum tube usually have three connections: triode form, super linear form and standard form. Theoretically speaking, the triode form by minimum distortion, output power is minimum; standard form get larger distortion, power is also the maximum; between super linear form between.

3. Affect the power transformer and output transformer of sound

High quality vacuum tube amplifier inseparable quality transformers, power transformers currently technically no trouble, the output transformer is the decision of the vacuum tube amplifier sound quality is the key. Because regardless of the output transformer selection is good, how sophisticated technology, both methods exist to avoid leakage inductance and stray capacitance components, resulting phase distortion. Output transformer as inductive element, to the transmission signals of different frequencies have different inductance. Therefore, the output of the transformer will be different in different voices lead. No high-quality output transformer, other aspects of the production of better quality vacuum tube amplifier is also meaningless.

YAQIN MC-50L Integrated vacuum tube amplifier SRPP circuit KT88(6550)*4 ultra-linear class AB1 power amplifier 2x50W 110V/220V

1. Using the latest improved vacuum tube 6P6P×4 do power amplifier ,

2. Use the improved ultra-linear push-pull amplifier circuit,

3. Pre-amplifier uses SRPP form circuit,

4. Using top-quality output transformer,

5. Using high-quality volume potentiometer,

6. Using high-quality electronic components to get better sound.

7. With the starting buffer function (about 30 seconds),

8. With 110V ~ 220V selection(Set before useing

Parameters

Output power 50W + 50W (6Ω)

THD ≤1.0% (at 30W)

SNR ≥85dB (A weight)

Vacuum tube KT88(6550)×4 ,12AT7×2, 12AU7×2

Frequency response 6Hz ~ 50KHz (-2dB)

Input Sensitivity 0.25V(1kHz)

Input interface RCA×4

Output Impedance 4Ω 8Ω

Power supply 110V~ 220V±5% (Set before using)

Power consumption 370W

Volume(W×D×H) 425mm x 325mm x 210mm

N.G. 20kg

W.G. 24kg

Vacuum tube amps the use of attention:

1. Disable output short circuit and output load, before you start you must first connect speakers or headphones, the best is always keep them connected,

2. Start with minimal volume,

3. The supply voltage should be stable, with the use of conditional HiFi clean power for better protection and sound,

4. When the vacuum tube amplifier operating temperature is high, pay attention to ventilation, not to touch hot tube,

5. Do not put water on a hot vacuum tubes,

5. Do not put water on a hot vacuum tubes,

6. Boot and shutdown interval of 5 minutes,

7. Do not over 6 hours of continuous work,

8.6 ohm speaker connected to the 4 ohm, 8 ohm interfaces are available,

9. vacuum tube amplifier sound 40% depending on the power amplifier tube quality, 40% depends on the quality of output transformer, 10% depends on other electronic components quality, 10% depending on the manufacturing process,

10. power supply voltage can be free custom (please consult).

Average Star Rating:
0 out of 5 (0 Rangeringer)
Navn Rating Feedback
Frakt selskap Frakt kostnader Estimert leveringstid
DHL 3 - 7 dager
UPS Expedited 3 - 7 dager
EMS 5 - 14 dager
Frakt luft post Gratis frakt 15 - 45 dager
Returrett Hvis produktet du får ikke er som beskrevet eller har dårlig kvalitet, lover selgeren at du kan returnere produktet før ordrens ferdigstillelse (dette skjer når du klikker på "Bekreft bestilling mottatt" eller overstiger bekreftelsens tidsramme) og får full refusjon. Fraktomkostningene betales av deg. Eller, du kan velge å beholde produktet og godtar størrelsen på refusjonsbeløpet direkte med selgeren.

NB!: Dersom selgeren gir deg"Lengre Beskyttelse" service på dette produktet, kan du be om refusjon inntil 15 dager etter bestillingens ferdigstillelse.
Selger Service Punktlig leveringHvis du ikke mottar ditt kjøp innen 60 dager, kan du be om en full refusjon før sluttføring av bestillingen (dette skjer når du klikker på "Bekreft bestilling mottatt" eller overgår bekreftelsens tidsramme).

Mest populære fra kategorien


Pris:  5718.00 kr / piece
fra AliExpress